Uni Mechanical Pen Kuru Toga Metal Nocturne Black (0.5 mm)
The Kuru Toga Metal in Nocturne Black is a fully metal mechanical pencil with a 0.5 mm lead and the characteristic Kuru Toga rotation mechanism. Each time you lift the pencil from the page, a spring-driven ratchet advances the lead slightly – so it wears evenly into a conical point rather than developing a flat edge on one side. The result is a consistently fine, even line width that stays sharp without manual adjustment. Made in Japan, approximately 145.8 mm long, weighing around 17.6 g.
Features
- Kuru Toga rotation mechanism: A spring-loaded gear drive rotates the lead by a small angle each time you lift it from the paper. The lead wears evenly all around and maintains a conical point – line width stays consistent, regardless of how long or at what angle you write.
- Resin nib damper: A small resin damping element sits inside the lead sleeve, absorbing writing vibrations. This minimises the typical wobble of the lead in the guide tube and gives your strokes a smooth, even quality.
- All-metal aluminium body: The entire body is made from aluminium with a fine ribbed texture on the shaft. This gives the pencil a cool, smooth feel and lowers the centre of gravity – the pen sits perfectly balanced in your hand during long writing sessions.
- Mild Edge Grip: The grip section combines a blasted surface finish with finely engraved grooves. The result is a matte, lightly textured surface that won't slip but won't dig into your skin either.
- Nocturne Black: The deep, even black finish isn't paint – it's part of the metal finishing. It shows no colour flaking and looks equally sophisticated in bright office light or soft evening light.
- Refillable: Compatible with standard 0.5 mm mechanical pencil leads; various hardness grades available.
Use & Tips
- The rotation mechanism works best with normal writing pressure and a writing angle of around 50–70° – if you hold it too flat, the gear mechanism engages less frequently.
- For technical drawings and graph paper: An HB or H lead grade will stay sharp enough for tight grids, even with even wear.
- For bullet journaling and dense handwriting, a softer lead grade (B) is recommended – it produces a visible, rich grey despite the fine point.
- The nib damper reduces lead rattle during transport – the Kuru Toga Metal works perfectly as an everyday pencil in your bag without a protective cap.
- Spare leads and erasers can be swapped via the push button at the end; the eraser cap is removable, with the lead supply stored underneath.
For Pencil Enthusiasts
The Kuru Toga mechanism uses a dual-drive structure: each time the lead touches the paper, it compresses the internal mechanism axially; when you lift it, a ratchet advances – the lead rotates by a defined angle increment with each writing cycle. The combination of a low centre of gravity from the all-metal body (aluminium, around 17.6 g at 145.8 mm length) and the resin-damped guide tube distinguishes the Kuru Toga Metal from plastic-based Kuru Toga models: the mass mechanically dampens hand tremor, whilst the nib damper compensates for micro-impacts at the lead sleeve. This is particularly relevant for fine line work, where lead breakage from impact forces is more common than from excessive pressure.
Technical Specifications
| Model / Series: | Kuru Toga Metal (M5-KH) |
| Colour: | Nocturne Black |
| Lead size: | 0.5 mm |
| Mechanism: | Automatic lead rotation (Kuru Toga Engine), spring-driven gear drive |
| Damping: | Nib damper (resin damping element in guide tube) |
| Grip section: | Mild Edge Grip (blasted finish + groove texture) |
| Material: | Aluminium (body), brass (internal components) |
| Length: | Approx. 145.8 mm |
| Weight: | Approx. 17.6 g |
| Origin: | Japan |
| Contents: | 1 mechanical pencil |